SHUTDOWN AND REBOOT MANUAL FOR THE 1KT WATER SYSTEM
===================================================
(posted May 2002; updated January 2003)


<SHUTDOWN>

  [1] shutdown DELL PC / stop pump A by software:
     1. click 'CimView'
     2. click 'Pump Screen'
     3. click 'detector pump A' OFF (right-top one in Pump Screen)
     4. click 'Return to Home Screen'
     5. click 'Start' then 'Turn Off Computer' (left-bottom corner in PC display)
     6. click 'OK'
     7. turn off main power of PC

  [2] turn off main power of water system:
     8. push green botton(OFF) @ left control panel

  [3] report to experts (people in this email)


<REBOOT>

  [1] turn on main power of water system:
     1. push red botton(ON) @ left control panel

  [2] reboot DELL PC / start pump A by software:
     2. turn on main power of PC (wait for a while)
     3. click 'Administrator'
     4. type passward 'fanuc'
     5. click 'CimView'
     6. click 'Start' ('K2Kmain.cim' window should appear)
     7. click 'Pump Screen'
     8. click 'Detector pump A' ON (right-top one in Pump Screen)'
     9. click 'Return to Home Screen'

  [3] brief check of water system:
    10. confirm total (water) flow = 80-100gpm @ right control panel

  [4] report to experts:
     - Shunichi Mine    090-4136-8379 <mine@neutrino.kek.jp>
     - Asia Zalipska    090-4428-6106 <jzal@neutrino.kek.jp>
     - Hank Sobel       <hsobel@uci.edu>
     - Roy Hall         <hall@sch2o.com>
     - Hans Berns       <berns@phys.washington.edu>
     - Yoshinari Hayato <hayato@neutrino.kek.jp>
     - Yoshitaka Itow   <itow@suketto.icrr.u-tokyo.ac.jp>
     - Makoto Miura     <miuram@suketto.icrr.u-tokyo.ac.jp>

Note:
  Currently, we are using the pump A. 
  We may switch to the pump B ocasionally.