# delayhist.XXXXXX format
# 
# for debugging internal processing delay time in gpstrg
#
# column 1: reference time axis (msec since gpstrg found new TRG data
#             available on the VME bus)
# column 2: delay until start of display_trg_time() call
# column 3: delay until beginning of sending data to nubl11 via TCP
# column 4: delay until end of TCP transfer and writing to gpstrg.data file
# column 5: delay until gpstrg.data file has been closed
# column 6: delay until GPS_TRIGGER display finished for current TRG data
# column 7: delay until end of processing display_trg_time() call
#
# note: columns 2 + 3 should stay below or at 150 msec to make sure that
# nubl11 can read valid GPS data (157 msec according to Kohama-san).
# If no data in columns 2-7 (all 0) then there were no spill triggers
# observed during the observation period.