# gnuplot macro file for KEK watersystem log data (all data)
#
# rev. 1/20/03, HGB

# global settings:

# set temporary working path for output files
# cd '/u/nurock/berns/watersys/temp'

# set pbm-format terminal emulation
set terminal pbm color small

# set plot size to 640x240 pixels
set size ratio 0.3 1.0,0.5

# plot grid lines
set grid

# x axis is time/date format as used in data file
set timefmt "%Y-%m-%d-%H:%M:%S"
set xdata time
set format x "%m/%d\n%Y"
# set format x "%m/%d\n%H:%M"
set xlabel " "
set xrange ["2003-01-01-00:00:00":*]

# set xlabel "JST date"

# individual plots for each data column

set output "valo_01.pbm"
set title  "Signet Flow Product  [0...100 GPM]"
set ylabel "GPM"
plot "wsys_2003.data" using 1:2 notitle with fsteps lt 9

set output "valo_02.pbm"
set title  "Signet Flow Waste  [0...100 GPM]"
set ylabel "GPM"
plot "wsys_2003.data" using 1:3 notitle with fsteps lt 9

set output "valo_03.pbm"
set title  "Signet Flow to DI Recirc  [0...100 GPM]"
set ylabel "GPM"
plot "wsys_2003.data" using 1:4 notitle with fsteps lt 9

set output "valo_04.pbm"
set title  "Signet Flow to Fast Recirc  [0...100 GPM]"
set ylabel "GPM"
plot "wsys_2003.data" using 1:5 notitle with fsteps lt 9

set output "valo_05.pbm"
set title  "Signet Flow UF Waste  [0...100 GPM]"
set ylabel "GPM"
plot "wsys_2003.data" using 1:35 notitle with fsteps lt 9

set output "valo_06.pbm"
set title  "Signet Flow UF Bypass  [0...100 GPM]"
set ylabel "GPM"
plot "wsys_2003.data" using 1:36 notitle with fsteps lt 9

set output "valo_07.pbm"
set title  "Signet Flow Total  [0...100 GPM]"
set ylabel "GPM"
plot "wsys_2003.data" using 1:26 notitle with fsteps lt 9

set output "valo_08.pbm"
set title  "Pressure of Detector (Water Height)  [0...1100 cm]"
set ylabel "cm"
plot "wsys_2003.data" using 1:11 notitle with fsteps lt 8

set output "valo_09.pbm"
set title  "Pressure of Detector (Low setting)  [0...1100 cm]"
set ylabel "cm"
plot "wsys_2003.data" using 1:12 notitle with fsteps lt 8

set output "valo_10.pbm"
set title  "Pressure after Detector Pumps  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:10 notitle with fsteps lt 3

set output "valo_11.pbm"
set title  "Pressure after Fast Recirc Filters  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:29 notitle with fsteps lt 3

set output "valo_12.pbm"
set title  "Pressure of City Water  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:9 notitle with fsteps lt 3

set output "valo_13.pbm"
set title  "Pressure after Repressurization Pumps  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:28 notitle with fsteps lt 3

set output "valo_14.pbm"
set title  "Pressure after Depth Filter  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:14 notitle with fsteps lt 3

set output "valo_15.pbm"
set title  "Pressure after Carbon  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:30 notitle with fsteps lt 3

set output "valo_16.pbm"
set title  "Pressure after Softener  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:33 notitle with fsteps lt 3

set output "valo_17.pbm"
set title  "Pressure after RO Pre-filter  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:32 notitle with fsteps lt 3

set output "valo_18.pbm"
set title  "Pressure after Pre-UV  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:31 notitle with fsteps lt 3

set output "valo_19.pbm"
set title  "Pressure after Anion Exchange  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:6 notitle with fsteps lt 3

set output "valo_20.pbm"
set title  "Pressure before UF Pre-Filter  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:15 notitle with fsteps lt 3

set output "valo_21.pbm"
set title  "Pressure after UV  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:8 notitle with fsteps lt 3

set output "valo_22.pbm"
set title  "Pressure after Ultra Filter  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:13 notitle with fsteps lt 3

set output "valo_23.pbm"
set title  "Pressure to Detector  [0...100 PSI]"
set ylabel "PSI"
plot "wsys_2003.data" using 1:16 notitle with fsteps lt 3

set output "valo_24.pbm"
set title  "Temperature of Detector  [0...100 deg F]"
set ylabel "Degrees Fahrenheit"
plot "wsys_2003.data" using 1:20 notitle with fsteps lt 1

set output "valo_25.pbm"
set title  "Temperature before Chiller  [0...100 deg F]"
set ylabel "Degrees Fahrenheit"
plot "wsys_2003.data" using 1:19 notitle with fsteps lt 1

set output "valo_26.pbm"
set title  "Temperature to Detector (after Chiller) [0...100 deg F]"
set ylabel "Degrees Fahrenheit"
plot "wsys_2003.data" using 1:21 notitle with fsteps lt 1

set output "valo_27.pbm"
set title  "Temperature of City Water  [0...100 deg F]"
set ylabel "Degrees Fahrenheit"
plot "wsys_2003.data" using 1:34 notitle with fsteps lt 1

set output "valo_28.pbm"
set title  "Temperature in Tent  [0...100 deg F]"
set ylabel "Degrees Fahrenheit"
plot "wsys_2003.data" using 1:22 notitle with fsteps lt 1

set output "valo_29.pbm"
set title  "Quality from Detector  [0...20 Megohms]"
set ylabel "MegOhms"
plot "wsys_2003.data" using 1:23 notitle with fsteps lt 7

set output "valo_30.pbm"
set title  "Quality after Mixbeds  [0...20 Megohms]"
set ylabel "MegOhms"
plot "wsys_2003.data" using 1:17 notitle with fsteps lt 7

set output "valo_31.pbm"
set title  "Quality after UV  [0...20 Megohms]"
set ylabel "Megohms"
plot "wsys_2003.data" using 1:25 notitle with fsteps lt 7

set output "valo_32.pbm"
set title  "Quality out of UF  [0...20 Megohms]"
set ylabel "Megohms"
plot "wsys_2003.data" using 1:24 notitle with fsteps lt 7

set output "valo_33.pbm"
set title  "UV Lamps Ouput Power  [0...100 %%]"
set ylabel "%%"
plot "wsys_2003.data" using 1:27 notitle with fsteps lt 4